Reference Guide

VLAN Commands 403
Example
This example configures VLAN 200 as the primary private VLAN.
private-vlan isolated
The private-vlan isolated Interface Configuration mode command configures the isolated
VLAN of the PVLAN. To return to the default configuration, use the no form of this command.
Syntax
private-vlan isolated vlan-id
no private-vlan isolated
• vlan-id — Specifies the ID of the isolated VLAN.
Default Configuration
No VLAN is configured.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
• This command creates an isolated VLAN and associates it with the primary VLAN.
• The command is executed in the context of the primary VLAN.
• An isolated VLAN can only be associated with one primary VLAN.
• A VLAN that has been configured as an isolated VLAN cannot be configured as a primary or
community VLAN.
• The command is not supported under the command
interface range vlan .
Console# config
Console(config)# vlan database
Console(config-vlan)# vlan 200
Console(config-vlan)# exit
Console(config)# interface vlan 200
Console(config-if)# private-vlan primary