Reference Guide

382 System Management
www.dell.com | support.dell.com
Syntax
asset-tag [ unit unit ] tag
no asset-tag [ unit unit ]
•
unit— Specifies the number of the unit. (Range: 1-6)
•
tag — Specifies the asset tag of the device. (Range: 1- 16 characters)
Default Configuration
No asset tag is defined.
The default unit number is that of the master unit
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies the asset tag of the master unit as "1qwepot".
show system id
The show system id User EXEC mode command displays system ID information.
Syntax
show system id [ unit unit ]
•
unit— Specifies the number of the unit. (Range: 1-6)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Console(config)# asset-tag 1qwepot