Reference Guide

380 System Management
www.dell.com | support.dell.com
show system
The show system User EXEC mode command displays system information.
Syntax
show system [ unit unit ]
•
unit— Specifies the number of the unit. (Range: 1-6)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the system information.
Console> show system
Unit Type
---- -----------------
1 PowerConnect 3424
Unit Main Power Supply Redundant Power Supply
---- ----------------- ----------------------
1OK
Unit Fan1 Fan2 Fan3 Fan4 Fan5
---- ---- ---- ---- ---- ----
1OKOK
Unit
Temperature
(Celsius)
Temperature Sensor Status
---- -------------------- -------------------------
130 OK