Reference Guide

System Management 377
User Guidelines
There are no user guidelines for this command.
Example
The following example displays stack status.
Console> show stack
Unit Address Software Master Uplink Downlink Status
---- ----------------- -------- ------ ------ -------- ------
1 00:00:b0:87:12:11 1.0.0.0 Enabled 2 6 Slave
2 00:00:b0:87:12:13 1.0.0.0 Enabled 5 1 Master
4 00:00:b0:87:12:14 1.0.0.0 5 6 Slave
5 00:00:b0:87:12:15 1.0.0.0 2 4 Slave
6 00:00:b0:87:12:16 1.0.0.0 4 1 Slave
Configured order: Unit 1 at Top, Unit 2 at bottom
Console> show stack
Unit Address Software Master Uplink Downlink Status
---- ----------------- -------- ------ ------ -------- ------
3 00:00:b0:87:12:13 1.0.0.0 1 4 Slave
4 00:00:b0:87:12:14 1.0.0.0 3 5 Slave
5 00:00:b0:87:12:15 1.0.0.0 4 6 Slave
6 00:00:b0:87:12:16 1.0.0.0 5 2 Slave
1 00:00:b0:87:12:12 1.0.0.0 Forced 6 1 Master
2 00:00:b0:87:12:11 1.0.0.0 Enabled 2 3 Slave
Configured order: Unit 1 at Top, Unit 6 at bottom
Can’t display order as requested.