Reference Guide

376 System Management
www.dell.com | support.dell.com
stack display-order
The stack display-order Global Configuration mode command configures the order of the units
in the display. To return to the default configuration, use the no form of this command.
Syntax
stack display-order top unit bottom unit
no stack display-order
• top unit— Specifies the number of the unit displayed at the top. (Range: 1-6)
•
bottom unit— Specifies the number of the unit displayed at the bottom. (Range: 1-6)
Default Configuration
The master unit is displayed at the top.
Command Modes
Global Configuration mode
User Guidelines
• If the units are not adjacent in ring or chain topology, the units are not at the edge and the
default display order is used.
Example
This example displays unit 6 at the top of the display and unit 1 at the bottom.
show stack
The show stack User EXEC mode command displays information about the status of a stack.
Syntax
show stack [ unit unit ]
•
unit— Specifies the number of the unit. (Range: 1-6)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
Console# config
Console(config)# stack display-order top 6 bottom 1