Reference Guide

Command Groups 37
Power-over-Ethernet Commands
QoS Commands
Command Group Description Access Mode
power inline Configures the administrative mode of the inline
power on an interface.
Interface
Configuration
power inline powered-
device
Adds a description of the powered device type
attached to the interface.
Interface
Configuration
power inline priority Displays port monitoring status. Interface
Configuration
power inline usage-
threshold
Configures the administrative mode of the inline
power on an interface.
Global
Configuration
power inline traps
enable
Adds a description of the powered device type
attached to the interface.
Global
Configuration
show power inline Displays port monitoring status. User EXEC
Command Group Description Access Mode
qos Enables quality of service (QoS) on the device and
enters QoS basic mode.
Global
Configuration
show qos Displays the QoS status. User EXEC
wrr-queue cos-map
Maps assigned CoS values to select one of the egress
queues.
Global
Configuration
priority-queue out
num-of-queues
Configures the number of expedite queues. Global
Configuration
show qos interface Displays interface QoS data. User EXEC
qos map dscp-queue Modifies the DSCP to CoS map. Global
Configuration
qos trust (Global) Configures the system to basic mode and the "trust"
state.
Global
Configuration
qos trust (Interface) Enables each port trust state. Interface
Configuration
qos cos Configures the default port CoS value. Interface
Configuration
show qos map Displays all the maps for QoS. User EXEC