Reference Guide

Spanning-Tree Commands 319
Example
The following example displays a pending MST region configuration.
exit (mst)
The exit MST Configuration mode command exits the MST configuration mode and applies all
configuration changes.
Syntax
exit
Default Configuration
This command has no default configuration.
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example exits the MST configuration mode and saves changes.
Console(config-mst)# show pending
Pending MST configuration
Name: Region1
Revision: 1
Instance Vlans Mapped State
-------- ------------ -----
0 1-9,21-4094 Enabled
1 10-20 Enabled
Console(config)# spanning-tree mst configuration
Console(config-mst)# exit