Reference Guide

318 Spanning-Tree Commands
www.dell.com | support.dell.com
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the configuration revision to 1.
show (mst)
The show MST Configuration mode command displays the current or pending MST region
configuration.
Syntax
show {current | pending}
• current — Indicates the current region configuration.
•
pending — Indicates the pending region configuration.
Default Configuration
This command has no default configuration.
Command Mode
MST Configuration mode
User Guidelines
The pending MST region configuration takes effect only after exiting the MST configuration
mode.
Console(config)# spanning-tree mst configuration
Console(config-mst)# revision 1