Reference Guide

Command Groups 29
Configuration and Image Files Commands
DHCP Filtering Commands
Ethernet Configuration Commands
Command Group Description Access Mode
copy Copies files from a source to a destination. Privileged EXEC
delete Deletes a file from a Flash memory device. Privileged EXEC
delete startup-config Deletes the startup-config file. Privileged EXEC
dir Displays a list of files on a flash file system. Privileged EXEC
more Displays a file. Privileged EXEC
rename Renames a file. Privileged EXEC
boot system Specifies the system image that the device loads at
startup.
Privileged EXEC
show running-config Displays the contents of the currently running
configuration file.
Privileged EXEC
show startup-config Displays the startup configuration file contents. Privileged EXEC
show bootvar Displays the active system image file that the device
loads at startup.
Privileged EXEC
Command Group Description Access Mode
ip dhcp filtering vlan Enable filtering of DHCP requests on a VLAN. Global
Configuration
ip dhcp filtering trust Configure a port as trusted for DHCP filtering
purposes.
Interface
Configuration
show ip dhcp filtering Display the DHCP filtering configuration. EXEC
Command Group Description Access Mode
interface ethernet Enters the interface configuration mode to
configure an Ethernet type interface.
Global
Configuration
interface range ethernet Enters the interface configuration mode to
configure multiple Ethernet type interfaces.
Global
Configuration
shutdown Disables interfaces. Interface
Configuration