Reference Guide

276 RMON Commands
www.dell.com | support.dell.com
rmon event
The rmon event Global Configuration mode command configures an event. To remove an
event, use the no form of this command.
Syntax
rmon event index type [ community text ] [ description text ] [ owner name ]
no rmon event index
• index — Specifies the event index. (Range: 1 - 65535)
•
type — Specifies the type of notification generated by the device about this event.
Possible values:
none , log , trap , log-trap .
•
community text — If the specified notification type is trap , an SNMP trap is sent to the
SNMP community specified by this octet string. (Range: 0-127 characters)
•
description text — Specifies a comment describing this event. (Range: 0-127 characters)
•
name — Specifies the name of the person who configured this event. If unspecified, the
name is an empty string.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
Startup Alarm The alarm that may be sent when this entry is first set. If the first sample is
greater than or equal to the rising threshold, and startup alarm is equal to rising
or rising and falling, then a single rising alarm is generated. If the first sample is
less than or equal to the falling threshold, and startup alarm is equal falling or
rising and falling, then a single falling alarm is generated.
Rising Threshold A sampled statistic threshold. When the current sampled value is greater than
or equal to this threshold, and the value at the last sampling interval is less
than this threshold, a single event is generated.
Falling Threshold A sampled statistic threshold. When the current sampled value is less than or
equal to this threshold, and the value at the last sampling interval is greater
than this threshold, a single event is generated.
Rising Event The event index used when a rising threshold is crossed.
Falling Event The event index used when a falling threshold is crossed.
Owner The entity that configured this entry.