Reference Guide

262 Radius Commands
www.dell.com | support.dell.com
Syntax
radius-server source-ip source
no radius-source-ip source
• source — Specifies a valid source IP address.
Default Configuration
The source IP address is the IP address of the outgoing IP interface.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the source IP address used for communication with RADIUS
servers to 10.1.1.1.
radius-server timeout
The radius-server timeout Global Configuration mode command sets the interval during which
the device waits for a server host to reply. To return to the default configuration, use the no form
of this command.
Syntax
radius-server timeout timeout
no radius-server timeout
• timeout — Specifies the timeout value in seconds. (Range: 1 - 30)
Default Configuration
The timeout value is 3 seconds.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
console(config)# radius-server source-ip 10.1.1.1