Reference Guide

26 Command Groups
www.dell.com | support.dell.com
ACL Commands
Address Table Commands
set line active Reactivates a locked line. Privileged EXEC
set enable-password active Reactivates a locked local password. Privileged EXEC
show passwords
configuration
Displays information about password management. Privileged EXEC
show users login-history Displays information about the login history of users. Privileged EXEC
show users accounts Displays information about the local user database. Privileged EXEC
Command Group Description Access Mode
mac access-list Creates Layer 2 ACLs. Global
Configuration
deny (MAC) Denies traffic if the conditions defined in the permit
statement match.
MAC Access-List
Configuration
service-acl Applies an ACL to the input interface. Interface (VLAN)
Configuration
show access-lists Displays ACLs defined on the device. Privileged EXEC
show interfaces access-
lists
Displays access lists applied on interfaces. Privileged EXEC
Command Group Description Access Mode
bridge address Adds a static MAC-layer station source address to
the bridge table.
Interface (VLAN)
Configuration
bridge multicast filtering Enables filtering of multicast addresses. Global
Configuration
bridge multicast address Registers MAC-layer multicast addresses to the
bridge table, and adds static ports to the group.
Interface (VLAN)
Configuration
bridge multicast
forbidden address
Forbids adding a specific multicast address to
specific ports.
Interface (VLAN)
Configuration
bridge multicast forward-
all
Enables forwarding all multicast frames on a port. Interface (VLAN)
Configuration
bridge multicast
forbidden forward-all
Forbids a port from becoming a forward-all
multicast port.
Interface (VLAN)
Configuration
bridge aging-time Sets the address table aging time. Global
Configuration