Reference Guide

QoS Commands 255
Example
The following example maps CoS 7 to queue 2.
qos map dscp-queue
The qos map dscp-queue Global Configuration mode command modifies the DSCP to CoS
map. To return to the default map, use the no form of this command.
Syntax
qos map dscp-queue dscp-list to queue-id
no qos map dscp-queue
• dscp-list — Specifies up to 8 DSCP values separated by a space. (Range: 0 - 63)
•
queue-id — Specifies the queue number to which the DSCP values are mapped.
Default Configuration
The following table describes the default map.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example maps DSCP values 33, 40 and 41 to queue 1.
qos trust (Global)
The qos trust Global Configuration mode command configures the system to the basic mode
and trust state. To return to the untrusted state, use the no form of this command.
Syntax
qos trust { cos | dscp }
no qos trust
Console(config)# wrr-queue cos-map 2 7
DSCP value 0-15 16-39 40-63
Queue-ID 1 2 3
Console(config)# qos map dscp-queue 33 40 41 to 1