Reference Guide

QoS Commands 253
show qos interface
The show qos interface User EXEC mode command displays interface QoS information.
Syntax
show qos interface [ ethernet interface-number | vlan vlan-id | port-channel number ]
[
queueing ]
•
interface-number — Valid Ethernet port number.
•
vlan-id — Valid VLAN ID.
•
number — Valid port-channel number.
•
queuing — Indicates the queue strategy (WRR or EF), the weight for WRR queues, the
CoS to queue map and the EF priority.
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC mode
User Guidelines
• If no keyword is specified, port QoS information (e.g., DSCP trusted, CoS trusted, untrusted,
etc.) is displayed.
• If no interface is specified, QoS information about all interfaces is displayed.
Examples
The following example displays QoS information about Ethernet port 1/e11.
Console> show qos interface ethernet 1/e11 queuing
Ethernet 1/e11
wrr bandwidth weights and EF priority:
qid weights Ef Priority
1 25 dis N/A
2 25 dis N/A
3 25 dis N/A
4 25 dis N/A