Reference Guide

Port Channel Commands 237
Example
The following example forces port 1/e1 to join port-channel 1 without an LACP operation.
show interfaces port-channel
The show interfaces port-channel Privileged EXEC mode command displays port-channel
information.
Syntax
show interfaces port-channel [ port-channel-number ]
•
port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information on all port-channels.
Console(config)# interface ethernet 1/e1
Console(config-if)# channel-group 1 mode on
Console# show interfaces port-channel
Channel Ports
------- ---------------------------------
1 Active: 1/e1, 2/e2
2 Active: 2/e2, 2/e7 Inactive: 3/e1
3 Active: 3/e3, 3/e8