Reference Guide

LACP Commands 201
LACP Commands
lacp system-priority
The lacp system-priority Global Configuration mode command configures the system priority.
To return to the default configuration, use the no form of this command.
Syntax
lacp system-priority value
no lacp system-priority
• value — Specifies system priority value. (Range: 1 - 65535)
Default Configuration
The default system priority is 1.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the system priority to 120.
lacp port-priority
The lacp port-priority Interface Configuration (Ethernet) mode command configures physical
port priority. To return to the default configuration, use the no form of this command.
Syntax
lacp port-priority value
no lacp port-priority
• value — Specifies port priority. (Range: 1 - 65535)
Console(config)# lacp system-priority 120