Reference Guide

192 IP Addressing Commands
www.dell.com | support.dell.com
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example the displays the configured IP interfaces and their types.
arp
The arp Global Configuration mode command adds a permanent entry in the Address Resolution
Protocol (ARP) cache. To remove an entry from the ARP cache, use the no form of this command.
Syntax
arp ip_addr hw_addr {ethernet interface-number | vlan vlan-id | port-channel port-channel
number.}
no arp ip_addr {ethernet interface-number | vlan vlan-id | port-channel port-channel number.}
• ip_addr — Valid IP address or IP alias to map to the specified MAC address.
•
hw_addr — Valid MAC address to map to the specified IP address or IP alias.
•
interface-number — Valid Ethernet port.
•
vlan-id — Valid VLAN number .
• port-channel number. — Valid Port-channel number.
Console# show ip interface
Gateway IP Address Type Activity status
------------------ ------ ---------------
10.7.1.1 Static Active
IP address Interface Type
------------- --------- -------
10.7.1.192/24 VLAN 1 Static
10.7.2.192/24 VLAN 2 DHCP