Reference Guide

162 Ethernet Configuration Commands
www.dell.com | support.dell.com
show interfaces configuration
The show interfaces configuration Privileged EXEC mode command displays the configuration
for all configured interfaces.
Syntax
show interfaces configuration [ethernet interface | port-channel port-channel-number ]
•
interface — Valid Ethernet port. (Full syntax: unit/port )
•
port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
• To view information on autonegotiation capabilities, use the show interfaces advertise
Privileged EXEC mode command.
Example
The following example displays the configuration of all configured interfaces:
Console# show interfaces configuration
Port Type Duplex Speed Neg Flow
Ctrl
Link
State
Back
Pressure
Mdix
Mode
---- ----------- ------ ----- ------- ---- ----- -------- ----
1/e1 100M-Copper Full 100 Enabled Off Up Disabled Auto
1/e2 100M-Copper Full 100 Enabled Off Up Disabled Auto
1/e3 100M-Copper Full 100 Enabled Off Up Disabled Auto
1/e4 100M-Copper Full 100 Enabled Off Up Disabled Auto
1/e5 100M-Copper Full 100 Enabled Off Up Disabled Auto
1/e6 100M-Copper Full 100 Enabled Off Up Disabled Auto
1/e7 100M-Copper Full 100 Enabled Off Up Disabled Auto
1/e8 100M-Copper Full 100 Enabled Off Up Disabled Auto
1/e9 100M-Copper Full 100 Enabled Off Up Disabled Auto
1/e10 100M-Copper Full 100 Enabled Off Up Disabled Auto