Reference Guide

152 Ethernet Configuration Commands
www.dell.com | support.dell.com
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
• Commands under the interface range context are executed independently on each active
interface in the range. If the command returns an error on one of the active interfaces, it does
not stop executing commands on other active interfaces.
Example
The following example shows how ports 5/e18 to 5/e20 and 3/e1 to 3/24 are grouped to receive
the same command.
shutdown
The shutdown Interface Configuration (Ethernet, port-channel) mode command disables an
interface. To restart a disabled interface, use the no form of this command.
Syntax
shutdown
no shutdown
Default Configuration
The interface is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example disables Ethernet port 1/e5 operations.
Console(config)# interface range ethernet 5/e18-5/e20,3/e1-3/e24
Console(config-if)#
Console(config)# interface ethernet 1/e5
Console(config-if)# shutdown