Users Guide
l Nombre de usuario, por ejemplo, "admin"
l Contraseñayconfirmacióndelacontraseña
Pulse Intro.
Paso 3 del asistente
Se muestra el texto siguiente:
Next, an IP address is setup.
The IP address is defined on the default VLAN (VLAN #1), of which all ports are members. This is the IP address you use to access the
CLI, Web interface, or SNMP interface for the switch.To setup an IP address:
Please enter the IP address of the device (A.B.C.D):[1.1.1.1]
Please enter the IP subnet mask (A.B.C.D or nn): [255.255.255.0]
IntroduzcaladirecciónIPylamáscaradesubredIP,porejemplo,1.1.1.1comodirecciónIPy255.255.255.0comomáscaradesubredIP.
Pulse Intro.
Paso 4 del asistente
Se muestra el texto siguiente:
Finally, setup the default gateway.
Please enter the IP address of the gateway from which this network is reachable (e.g. 192.168.1.1).Default gateway (A.B.C.D):[0.0.0.0]
Introduzca la puerta de enlace predeterminada.
PulseIntro.Apareceeltextosiguiente(encasodeutilizarlosparámetrosmencionados):
This is the configuration information that has been collected:
==============================================================
SNMP Interface = Dell_Network_Manager@0.0.0.0
User Account setup = admin
Password = *
Management IP address = 1.1.1.1 255.255.255.0
Default Gateway = 1.1.1.2
==============================================================
NOTA: silaprimeraylasegundaentradadecontraseñanocoinciden,sesolicitaráalusuarioquevuelvaaespecificarlashastaquecoincidan.