Reference Guide

802.1x Commands 445
Syntax
dot1x timeout server-timeout seconds
no dot1x timeout server-timeout
• seconds — Time in seconds that the device waits for a response from the authentication
server. (Range: 1-65535 seconds)
Default Configuration
The timeout period is 30 seconds.
Command Mode
Interface configuration (Ethernet) mode
User Guidelines
• The actual timeout can be determined by comparing the dot1x timeout server-timeout value
and the result of multiplying the
radius-server retransmit value with the radius-server
timeout
value and selecting the lower of the two values.
Examples
The following example sets the time for the retransmission of packets to the authentication
server to 3600 seconds.
show dot1x
The show dot1x Privileged EXEC mode command displays the 802.1X status of the device or
specified interface.
Syntax
show dot1x [ ethernet interface ]
•
interface — Valid Ethernet port. (Full syntax: unit/port )
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Console(config-if)# dot1x timeout server-timeout 3600