Reference Guide

VLAN Commands 419
show vlan internal usage
The show vlan internal usage Privileged EXEC mode command displays a list of VLANs used
internally by the device.
Syntax
show vlan internal usage
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays VLANs used internally by the device.
show interfaces switchport
The show interfaces switchport Privileged EXEC mode command displays the switchport
configuration.
Syntax
show interfaces switchport {ethernet interface | port-channel port-channel-number }
•
interface — A valid Ethernet port number.
•
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Console# show vlan internal usage
VLAN Usage IP address Reserved
---- --------- ---------- --------
1007 Eth 1/e21 Active No
1008 Eth 1/e22 Inactive Yes
1009 Eth 1/e23 Active Yes