Reference Guide

SNMP Commands 293
Examples
The following example enables SNMP failed authentication traps.
snmp-server contact
The snmp-server contact Global Configuration mode command configures the system contact
(sysContact) string. To remove system contact information, use the no form of the command.
Syntax
snmp-server contact text
no snmp-server contact
• text — Specifies the string that describes system contact information.
(Range: 0-160 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
• Do not include spaces in the text string or place text that includes spaces inside quotation
marks.
Example
The following example configures the system contact point called Dell_Technical_Support.
snmp-server location
The snmp-server location Global Configuration mode command configures the system location
string. To remove the location string, use the no form of this command.
Syntax
snmp-server location text
no snmp-server location
• text — Specifies a string that describes system location information.
(Range: 0-160 characters)
Console(config)# snmp-server trap authentication
console(config)# snmp-server contact Dell_Technical_Support