Reference Guide

278 RMON Commands
www.dell.com | support.dell.com
The following table describes significant fields shown above:
show rmon log
The show rmon log User EXEC mode command displays the RMON log table.
Syntax
show rmon log [ event ]
•
event — Specifies the event index. (Range: 0 - 65535)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Field Description
Index An index that uniquely identifies the event.
Description A comment describing this event.
Type The type of notification that the device generates about this event. Can have the
following values: none, log, trap, log-trap. In the case of log, an entry is made in
the log table for each event. In the case of trap, an SNMP trap is sent to one or
more management stations.
Community If an SNMP trap is to be sent, it is sent to the SNMP community specified by this
octet string.
Owner The entity that configured this event.
Last time sent The time this entry last generated an event. If this entry has not generated any
events, this value is zero.