Reference Guide

IGMP Snooping Commands 185
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
• The leave timeout should be set greater than the maximum time that a host is allowed to
respond to an IGMP query.
•Use
immediate leave only where there is just one host connected to a port.
Example
The following example configures the host leave-time-out to 60 seconds.
show ip igmp snooping mrouter
The show ip igmp snooping mrouter User EXEC mode command displays information on
dynamically learned multicast router interfaces.
Syntax
show ip igmp snooping mrouter [ interface vlan-id ]
•
vlan-id — VLAN number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Console(config)# interface vlan 2
Console(config-if)# ip igmp snooping leave-time-out 60