Reference Guide

Ethernet Configuration Commands 171
Syntax
show ports storm-control [ interface ]
•
interface — A valid Ethernet port. (Full syntax: unit/port )
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the storm control configuration.
Console# show ports storm-control
Port State Rate
[Kbits/
Sec]
Included
---- -------- --------- ------------------------------.
1/e1 Enabled 70 Broadcast, Multicast, Unknown
Unicast
2/e1 Enabled 100 Broadcast
3/e1 Disabled 100 Broadcast