Reference Guide

Ethernet Configuration Commands 159
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In the following example, the counters for interface 1/e1 are cleared.
set interface active
The set interface active Privileged EXEC mode command reactivates an interface that was
shutdown.
Syntax
set interface active { ethernet interface | port-channel port-channel-number }
•
interface — Valid Ethernet port. (Full syntax: unit/port )
•
port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
• This command is used to activate interfaces that were configured to be active, but were
shutdown by the system for some reason (e.g.,
port security) .
Example
The following example reactivates interface 1/e5.
show interfaces advertise
The show interfaces advertise Privileged EXEC mode command displays autonegotiation data.
Console> clear counters ethernet 1/e1
Console# set interface active ethernet 1/e5