Reference Guide

146 Configuration and Image Files
www.dell.com | support.dell.com
show bootvar
The show bootvar Privileged EXEC mode command displays the active system image file that is
loaded by the device at startup.
Syntax
show bootvar [ unit unit ]
•
unit — Specifies the unit number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the active system image file that is loaded by the device at
startup.
Console# show bootvar
Images currently available on the FLASH
image-1 active
image-2 not active (selected for next boot)
Unit Active Image Selected for next boot
---- ------------ ----------------------
1 image-1 image-2
2 image-1 image-1