Datasheet

http://www.instructables.com/id/Dell-W5001C-50quot-plasma-fix/
Image Notes
1. Dell W5001C 50" plasma
step 2: Teardown
To access the power supply, one must remove the sheet metal backing to the television. This is quite easy and only requires a T20 torx screwdriver and a common
philips screwdriver. There are many torx screws around the periphery, four large philips mounting screws, and a couple smaller philips screws. Once all screws are
removed, the sheetmetal backing can be pried off the TV (in fact, it may fall right off after the last screw is undone so watch out!) It helps to have a friend at this point
because handling the large back piece can be a bit unwieldy with one person..
Image Notes
1. Torx screws
2. Torx screws
3. Small philips screws
4. More torx screws
5. More torx screws
Image Notes
1. This is what is under the sheet metal backing.