User's Manual
Table Of Contents
- Dell Latitude 10 – ST2e Owner's Manual
- Working on Your Computer
- Removing and Installing Components
- Recommended Tools
- Internal View
- Removing the Base Cover
- Installing the Base Cover
- Removing the Battery
- Installing the Battery
- Removing the Front Camera
- Installing the Front Camera
- Removing the Speakers
- Installing the Speakers
- Removing the Docking Board
- Installing the Docking Board
- Removing the System Board
- Installing the System Board
- Removing the Rear Camera
- Installing the Rear Camera
- Removing the Coin-Cell Battery
- Installing the Coin-Cell Battery
- Removing the Volume-Button Board
- Installing the Volume-Button Board
- System Setup
- Troubleshooting Your Computer
- Specifications
- Contacting Dell
Removing the System Board
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the:
a) base cover
b) battery
c) speaker
d) front camera
e) docking board
3. Disconnect the LVDS and docking board cables.
4. Remove the screws that secure the system board to the computer.
5. Lift up the system board at a 45° angle and pull it away from the computer.
Installing the System Board
1. Place the system board in its compartment on the computer.
2. Tighten the screws to secure the system board to the computer.
3. Connect the LVDS and docking board cables to the system board.
16