Users Guide
4 To remove Boot device, select PD from Select Physical Disk.
Click on No for Legacy OpROM Boot Device.
NOTE: This is a Boot device for Legacy BIOS Mode. If the Server is in UEFI Boot mode, you will need to set your Boot
device in System BIOS.
Selecting physical disk drive operations in HII Boot device
The table describes the Select Physical Disk Operations screen details:
Menu Item Description
Select Physical Disk Allows you to select the physical disk.
legacy OpROM
Bootdevice
Allows you to set the selected device as boot device.
Write Cache setting Allows you to enable or disable.
Navigating to the Dell HBA conguration utility
1 Enter the HII conguration utility. See Entering the HII conguration utility.
The Device Settings screen displays a list of NIC ports and the Dell HBA conguration utility.
2 To access the Dell HBA conguration utility, click Dell HBA conguration utility.
The list of Conguration Options appears:
• Controller management
• Physical disk management
Controller management
Controller management allows you to congure, manage, and view the controller properties.
Viewing the controller properties
View Controller Properties screen allows you to view the controller properties.
In the System Setup Main Menu, click Device Settings > Dell HBA Conguration Utility > Controller Management > View Controller
Properties.
The table describes the elds on the View Controller Properties screen:
Menu Item
Description
Controller Name Indicates the controller name.
Controller Revision Indicates the controller revision.
PCI ID Indicates the PCI ID.
PCI Slot Number Indicates the controller slot numbering.
Host Interface Indicates the controller type.
Physical Disk Count Indicates the count of physical drive.
Firmware Type Indicates the type of rmware.
Human Interface Infrastructure conguration utility 33