User`s guide

3. Press the Select button to go to Clean Printhead menu.
4. Press the Select button to perform a Basic Clean.
or
Press the down Arrow button
to select Deep Clean and press the Select button to perform a Deep Clean.
Replacing the Printhead
NOTE: The printhead need not be changed normally, during the lifespan of the printer.
1. Turn on your printer.
2. Lift the scanner base unit from the front.
The printhead moves to a center position. Wait until the printhead is idle and silent.
3. Remove the ink cartridges. For more information, see the steps 3 and 4 under the section
Replacing Ink Cartridges.
4. Lift the printhead latch to release the printhead from the carriage.
5. Remove the old printhead from the carriage.
Downloaded from ManualsPrinter.com Manuals