Users Guide
Table Of Contents
- Petunjuk keselamatan
- Tentang monitor Anda
- Mengkonfigurasi monitor
- Menyambungkan penyangga
- Menggunakan ekstensi miring, putar, dan vertikal
- Memutar Posisi Layar
- Menyesuaikan Rotation Display Settings of Your System [Pengaturan Tampilan Rotasi Sistem]
- Merapikan kabel
- Menyambungkan monitor
- DPBS (Sinkronisasi Tombol Daya Dell)
- Mengamankan monitor menggunakan kunci Kensington (Opsional)
- Melepas penyangga monitor
- Pemasangan di dinding (Opsional)
- Mengoperasikan monitor
- Penyelesaian Masalah
- Lampiran
Mengkonfigurasi monitor | 39
Menggunakan fungsi DPBS
Mengaktifkan dengan kabel USB-C
Saat Anda menyambungkan kabel USB-C, status Monitor/PC akan ditampilkan sebagai
berikut:
No USB-C Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/P3222QE
No USB-C Cable
The display will go into Standby mode in 4 minutes.
www.dell.com/P3222QE
New Power state of monitor (ON)*
Initial monitor power state (No cabel)
Initial monitor power state (No cabel)
New Power state of monitor (ON)
1 2
1 2
Initial system power state (OFF)
Initial system power state (ON)
New Power state of system (ON)*
New Power state of system (ON)
Connect USB-C
cable
Connect USB-C
cable
USB-C
USB-C
* Not all Dell PC systems support to
wake up the platform via the monitor.
USB-C
USB-C
USB-C
USB-C
Saat Anda menekan tombol daya monitor maupun PC, status PC dan monitor akan
ditampilkan seperti berikut:
New Power state of monitor (ON)
New Power state of monitor (OFF)
Initial monitor power state (OFF)
Initial monitor power state (ON)
1 2
1 2
Press PC/Monitor
power button
Press PC/Monitor
power button
USB-C
USB-C
Initial system power state (OFF)
Initial system power state (ON)
New Power state of system (ON)
USB-C
USB-C
New Power state of system (OFF)
USB-C
USB-C