Users Guide

About Your Monitor | 9
Bottom View
1 2 3 4 5 6 7
8
Label Description Use
1 AC power port To connect the monitor power cable.
2 HDMI port Connect your computer with HDMI cable (optional).
3 DP port (in) Connect your computer with DP cable.
4 USB Type-C/DisplayPort Connect to your computer using the USB Type-C
cable.
The USB 3.1 Type-C port offer the fastest
transfer rate and the alternate mode with DP
1.4 support the maximum resolution of 1920
x1080 at 60Hz(U2419HC) and 2560 x 1440 at
60Hz(U2719DC), PD 20V/3.25A, 15V/3A, 9V/3A,
5V/3A.
NOTE: USB Type-C is not supported on Windows
versions that are prior to Windows 10.
5 DP port (out)
DP output for MST (multi-stream transport)
capable monitor. To enable MST, refer to instruction
on section “Connecting the Monitor for DP MST
Function”.
NOTE: Remove the rubber plug when using DP out
connector.
6 Audio line-out port Connect speakers to playback audio coming through
USB Type-C or DP audio channels.
Only supports 2-channel audio.
NOTE: The audio line-out port does not support
headphones.
7 USB downstream ports (4) Connect your USB device. You can use these ports
only after you have connected the USB cable (Type-C
to Type-C) from the computer to the monitor. Port
with
battery icon supports Battery Charging
Rev. 1.2.
8 Stand lock Lock the stand to the monitor using a M3 x 6 mm
(U2719DC)/ M3 x 8 mm (U2419HC) screw (screw
not included).