Users Guide

28 | Setting Up the Monitor

Connecting Your Monitor

WARNING: Before you begin any of the procedures in this section, follow the

Safety Instructions.

To connect your monitor to the computer:

1 Turn o your computer.

2 Connect the DP/USB type-C cable from your monitor to thecomputer.

3 Switch on your monitor.

4 Select the correct input source at monitor OSD Menu and turn on your computer.

NOTE: U2419HC/U2719DC default setting is DP 1.4. A DP 1.1 Graphic card

may not display normally. Please refer to “product specific problems – No image when

using DP connection to the PC” to change default setting.

Connecting the HDMI cable (Optional)

HDMI

Connecting the DP cable