Users Guide

Operating your monitor │ 49
OSD warning messages
When the Dynamic Contrast feature is enabled (in these preset modes: Game or
Movie), the manual brightness adjustment is disabled.
To allow manual adjustment of brightness, the Dynamic Contrast will be
Yes
No
switched off.
Do you want to continue?
Dell 20 Monitor
P2018H
When the monitor does not support a particular resolution mode, the following
message is displayed:
The current input timing is not supported by the monitor display.Please
change your input timing to
1600x900, 60Hz or any other monitor
listed timing as per the monitor specifications.
Dell P2018H Monitor
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See Monitor specifications for the Horizontal and Vertical
frequency ranges addressable by this monitor. Recommended mode is 1600 x 900.
Before the DDC/CI function is disabled, the following message is displayed:
The function of adjusting display setting using PC application will be
disabled.
Do you wish to disable DDC/CI function?
Yes
No
Dell 20 Monitor
P2018H