Users Guide

● hmac-sha1–96
When FIPS mode is disabled:
● hmac-sha2-256
● hmac-sha1
● hmac-sha1–96
● hmac-md5
● hmac-md5-96
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON, S6000, S6000–ON, S5000, S4810, S4820T, S3048–
ON, S4048–ON, MXL, C9010, S3100 series, and Z9100-ON.
Usage
Information
● You can select one or more MAC algorithms from the list.
● Client-supported MAC list gets preference over the server-supported MAC list in selecting the MAC
algorithm for the SSH session.
● When the MAC (-m) option is used with the SSH CLI, it overrides the configured or default MAC list.
● When FIPS is enabled or disabled, the client MACs get default configuration.
ip ssh password-authentication
Enable password authentication for the SSH server.
Syntax
ip ssh password-authentication enable
To disable password-authentication, use the no ip ssh password-authentication enable
command.
Parameters
enable Enter the keyword enable to enable password-authentication for the SSH server.
Defaults Enabled
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
1398 Security