Users Guide

Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.5(0.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.7.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-7.7.1.0 Introduced on the E-Series.
Related
Commands
● monitor session — enables a monitoring session.
ip access-group
Assign an IP access list (IP ACL) in the monitor session mode.
Syntax
ip access-group access-list-name
Parameters
access-list-name Enter the name of a configured access list, up to 140 characters.
Defaults Not enabled.
Command Modes
MONITOR SESSION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(0.0) Introduced the command under the MONITOR SESSION mode on the S6000,
S6100–ON, and Z9100–ON.
ipv6 access-group
Assign an IPv6 access list (IPv6 ACL) in the monitor session mode.
Syntax
ipv6 access-group access-list-name
1184 Port Monitoring