Release Notes

-- Fan Status --
Unit Bay TrayStatus Fan1 Speed Fan2 Speed
------------------------------------------------------------------------------------
1 1 up up 8492 up 8936
1 2 up up 8511 up 8699
1 3 up up 8511 up 8757
1 4 up up 8604 up 8680
1 5 up up 8529 up 8816
Speed in RPM
Upgrade the GRUB or Boot Flash
To upgrade the GRUB or Boot Flash from Dell EMC Networking OS, perform the following steps:
1. Upgrade the Z9100-ON Boot Flash image.
EXEC Privilege Mode
upgrade boot bootflash-image stack-unit <stack–unit–id> booted
DellEMC#upgrade boot bootflash-image stack-unit 1 booted
Current Boot information in the system:
========================================================================
Card BootFlash Current Version New Version
------------------------------------------------------------------------
Unit1 Boot Flash 3.23.2.8 3.23.2.13
***********************************************************************
* Warning - Upgrading boot flash is inherently risky and should only *
* be attempted when necessary. A failure at this upgrade may cause *
* a board RMA. Proceed with caution ! *
***********************************************************************
Proceed upgrade Boot Flash image for stack-unit 1 [yes/no]: yes
!!!
Bootflash image upgrade for stack-unit 1 completed successfully.
DellEMC#
2. Reload the unit.
EXEC Privilege Mode
reload
3. Verify whether the upgrade is successful.
DellEMC#show system stack-unit 1
-- Unit 1 --
Unit Type : Management Unit
Status : online
Next Boot : online
Required Type : Z9100-ON - 34-port TE/TF/FO/FI/HU G (Z9100-ON)
Current Type : Z9100-ON - 34-port TE/TF/FO/FI/HU G (Z9100-ON)
Master priority : NA
Hardware Rev : 0.0
Num Ports : 130
Up Time : 1 min, 7 sec
Dell Networking OS Version : 9.14(2.9)
Jumbo Capable : yes
POE Capable : no
FIPS Mode : disabled
Boot Flash : 3.23.2.13
Boot Selector : 3.23.0.0-9
Memory Size : 3177226240 bytes
Temperature : 32C
Voltage : ok
Serial Number : NA
10