Reference Guide

Version Description
9.3(0.0) Introduced on the S6000, S4810, and S4820T.
Usage
Information
The following information is displayed based on the buffer-info type, such as device-level details, queue-
based snapshots, or priority group-level snapshot in the egress and ingress direction of traffic:
● Device-ingress – Displays total buffer accounting usage for the unit.
● Device-egress –Display total buffer usage for the unit, total multicast buffer usage for the unit and
also on per-service-pool basis. Counters will be displayed for the 2 service-pools – one for normal
traffic and other for DCB traffic.
When the buffer-stats-snapshot is disabled, the following informational message is displayed when you
run the show command: %Info: Buffer-stats-snapshot feature is disabled.
Example
DellEMC# show hardware buffer-stats-snapshot resource interface
fortyGigE 0/0 priority-group 7
Unit 0 unit: 0 port: 1 (interface Fo 0/0)
--------------------------------------------------
PG# PRIORITIES SHARED CELLS HEADROOM CELLS
--------------------------------------------------
7 0-2,5 0 0
DellEMC# show hardware buffer-stats-snapshot resource interface
fortyGigE 0/0 priority-group 7
Unit 0 unit: 0 port: 1 (interface Fo 0/0)
--------------------------------------------------
PG# PRIORITIES SHARED CELLS HEADROOM CELLS
--------------------------------------------------
0 - 0 0
1 - 0 0
2 - 0 0
3 7 0 0
4 6 0 0
5 4 0 0
6 3 0 0
7 0-2,5 0 0
520 Debugging and Diagnostics