Reference Guide

To disable, use the no neighbor [ip-address | peer-group-name] activate command.
Parameters
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.
peer-group-name (OPTIONAL) Enter the name of the peer group.
activate Enter the keyword activate to enable the neighbor/peer group in the new AFI/
SAFI.
Defaults
IPv4 Unicast – Enabled.
IPv6 Unicast – Disabled.
Command Modes CONFIGURATION-ROUTER-BGP-ADDRESS FAMILY
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
By default, when you create a neighbor/peer group configuration in the Router BGP context, this enables
IPv4/Unicast AFI/SAFI. When you use activate in the new context, the neighbor/peer group enables
for AFI/SAFI. It is possible to activate or de-activate a peer from the IPv4/IPv6 unicast address family.
NOTE: The no neighbor peer ip-address activate command takes precedence over the
no neighbor peer-group-name activate command.
The following tables list the neighbor activation and its expected results for IPv4 and IPv6 address
families:
Table 1. Neighbor activation and update status for peers activated for IPv4
address family
S.No Peer – IPv4
address family
Peer group Update status for IPv4
prefixes
1. Activate Activate Send Updates
2. Activate No-Activate Send Updates
3. No-Activate Activate Stop Updates
4. No-Activate No-Activate Stop Updates
Border Gateway Protocol 365