Reference Guide

VT - Vxlan Tunnel
LocalAddr RemoteAddr Interface State Rx-int Tx-int Mult Clients
* 10.1.3.2 10.1.3.1 Te 1/3/1 Up 300 250 3 C
show bfd neighbors
* - Active session role
Ad Dn - Admin Down
B - BGP
C - CLI
I - ISIS
O - OSPF
O3 - OSPFv3
R - Static Route (RTM)
M - MPLS
V - VRRP
VT - Vxlan Tunnel
LocalAddr RemoteAddr Interface State Rx-int Tx-int Mult Clients
* 5.1.1.1 5.1.1.2 Po 30 Up 200 200 3 O
* 6.1.1.1 6.1.1.2 Vl 30 Up 200 200 3 O
* 7.1.1.1 7.1.1.2 Te 1/21/1 Up 200 200 3 O
The following example shows the show bfd vrf neighbors command output showing the
nondefault VRF.
DellEMC(conf)#do sho bfd vrf vrf2 neighbors
* - Active session role
Ad Dn - Admin Down
B - BGP
C - CLI
I - ISIS
O - OSPF
O3 - OSPFv3
R - Static Route (RTM)
M - MPLS
V - VRRP
VT - Vxlan Tunnel
LocalAddr RemoteAddr Interface State Rx-int Tx-int Mult
VRF Clients
* 13.1.1.1 13.1.1.2 Te 1/1/ Up 200 200 3 2
R
* 23.1.1.1 23.1.1.2 Vl 300 Up 200 200 3 2
R
* 33.1.1.1 33.1.1.2 Vl 301 Up 200 200 3 2
R
Example (Detail)
DellEMC# show bfd neighbors detail
Session Discriminator: 1
Neighbor Discriminator: 1
Local Addr: 10.1.3.2
Local MAC Addr: 00:01:e8:02:15:0e
Remote Addr: 10.1.3.1
Remote MAC Addr: 00:01:e8:27:2b:f1
Int: TenGigabitEthernet 1/3/1
State: Up
Configured parameters:
TX: 100ms, RX: 100ms, Multiplier: 3
Neighbor parameters:
TX: 250ms, RX: 300ms, Multiplier: 4
Actual parameters:
TX: 300ms, RX: 250ms, Multiplier: 3
312 Bidirectional Forwarding Detection (BFD)