Reference Guide

Version Description
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the C-Series and S-Series.
6.1.1.1 Introduced on the E-Series.
Example
DellEMC# show qos qos-policy-output
Qos-policy-output qosOut
Rate-limit 50 50 peak 50 50
Wred yellow 1
Wred green 1
DellEMC#
show qos statistics
View QoS statistics.
Syntax
show qos statistics {egress—queue [interface]} | {wred-profile [interface]} |
[interface]
Parameters
egress-queue
interface
Enter the keyword egress-queue to display the egress-queue statistics and optionally one of
the following keywords and slot/port or number information.
● For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the
slot/port/subport information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port
information.
wred-profile
interface
Enter the keywords wred-profile and optionally one of the following keywords and slot/port
or number information:
● For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the
slot/port/subport information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port
information.
interface Enter one of the following keywords and slot/port or number information:
● For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the
slot/port/subport information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port
information.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking
OS Command Line Reference Guide.
Version Description
9.12(0.0) Modified to display the global WRED state.
Quality of Service (QoS) 1245