Reference Guide

Example
DellEMC#show alarms
-- Minor Alarms --
Alarm Type Duration
-----------------------------------------------------------
-- Major Alarms --
Alarm Type Duration
-----------------------------------------------------------
PEM 2 in unit 1 down 13 min, 36 sec
Fan 1 in PSU 2 of Unit 1 is down or removed 13 min, 34 sec
DellEMC#
show command-tree
Display the entire CLI command tree, and optionally, display the utilization count for each command and its options.
Syntax
show command-tree [count | no]
Parameters
count Display the command tree with a usage counter for each command.
no Display all of the commands that may be preceded by the keyword no, which is the
keyword used to remove a command from the running-configuration.
Defaults None
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.2.1.0 Introduced.
Usage
Information
Reload the system to reset the command-tree counters.
Example
Dell# show command-tree count
!
Enable privilege mode:
enable command usage:3
<0-15> option usage: 0
exit command usage:1
show command-tree command usage:9
count option usage: 3
118 Control and Monitoring