White Papers

ManualsBrandsDell ManualsAccess PlatformsOS9

Table Of Contents

Reload Dell EMC Networking OS after executing this command. To copy Dell EMC Networking OS from

the management unit to one or more stack members, use the upgrade system stack-unit (S-

Series stack member) command.

Example

DellEMC# upgrade system ?

ftp: Copy from remote file system (ftp://userid:password@hostip/

filepath)

scp: Copy from remote file system (scp://userid:password@hostip/

filepath)

tftp: Copy from remote file system (tftp://hostip/filepath)

DellEMC# upgrade system ftp://username:password@10.11.1.1/FTOS-

SB-7.7.1.0.bin

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!

Erasing Sseries ImageUpgrade Table of Contents, please wait

.!........................................................

...........................................................

....................................!

12946259 bytes successfully copied

DellEMC# reload

DellEMC#

verified boot

Enable OS image hash validation during system startup.

Syntax

verified boot

To disable OS image hash validation, use the no verified boot command.

Defaults Not configured

Command Modes CONFIGURATION

Command

History

Version Description

9.14(1.0) Introduced on the S4810 and S4820T.

9.14(0.0) Introduced on the S5048F–ON.

9.13(0.0) Introduced on the S3100 series, S3048–ON, S4048–ON, S4048T-ON, S5000,

S6000, S6000–ON, S6010–ON, S6100–ON, Z9100–ON, MXL, and FN-IOM.

Usage

Information

When you reboot the system using the reload command, the system performs OS image verification

on the primary boot image. You can enable boot image hash validation only for images on local flash

partitions such as A: or B:.

Example

DellEMC(config)# verified boot

verified boot hash

Verify and store the hash value of the startup configuration.

Syntax

verified boot hash {system-image {A: | B:} | startup-config} hash value

File Management 85