White Papers

Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage
Information
You can use this command to configure the group of Radius servers used for Authentication,
Authorization, and Accounting purposes.
If the RADIUS group is not configured for Authentication, Authorization, and Accounting, then globally
configured Radius servers are used for the purposes.
When the RADIUS group is removed, the AAA configuration is also removed.
Example
client
Configures trusted DAC clients.
Syntax
client {ipv4-addr | ipv6-addr | hostname} [vrf vrf-name] [key [encryption-
type] key]
To undo the DAC client configuration, enter the no client host command.
Defaults If VRF is not configured, default VRF is considered.
Parameters
ipv4–addr Enter the keyword ipv4–addr to specify the IPv4 address of the DAC.
ipv6–addr Enter the keyword ipv6–addr to specify the IPv6 address of the DAC.
hostname Enter the keyword hostname to enter the name of the host.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to associate a VRF with
the client.
key (Optional) Enter the keyword key to specify an encryption key.
encryption-type (Optional) Enter either 0 or 7 as the encryption type for the specified key. The
options are:
● 0 – implies that the key is not encrypted and is stored as clear text.
● 7 – implies that the key is encrypted and hidden.
key Enter a string that is the key to be exchanged between the switch and the dynamic
authorization client. The key can be up to 42 characters long.
Command Modes
● CONF-DYNAMIC-AUTH
Usage
Information
● It is possible to configure more than one dynamic authorization clients Duplicate (ipv4-addr or ipv6-
addr or host-name) configurations are not allowed.
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Security 1417