White Papers

Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(0.0) Modified to display the global WRED state.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
6.1.1.1 Introduced on the E-Series.
Example
DellEMC# show qos wred-profile
Global Wred State: Disabled
Wred-profile-name min-threshold max-threshold max-drop-rate
wred_drop 0 0 100
wred_teng_y 467 4671 100
wred_teng_g 467 4671 50
wred_fortyg_y 467 4671 50
wred_fortyg_g 467 4671 25
DellEMC#
test cam-usage
Check the Input Policy Map configuration for the CAM usage.
S4820T
Syntax
test cam-usage service-policy input policy-map stack-unit {[number port-set
portpipe number] | [all]}
Parameters
policy-map Enter the policy map name.
stack-
unit number
(OPTIONAL) Enter the keyword stack-unit then the stack-unit slot number.
port-set portpipe
number
Enter the keywords port-set then the stack-unit port pipe number. The range is
from 0 or 1.
stack-unit all (OPTIONAL) Enter the keywords stack-unit all to indicate all stack-unit.
Defaults none
Command Modes EXEC
Quality of Service (QoS) 1317