Deployment Guide

ip control-plane egress-filter
Enable egress Layer 3 ACL lookup for IPv4 CPU traffic.
Syntax
ip control-plane egress-filter
Defaults Not enabled.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
show aclrange
Display the list of ACL ranges configured and ACLs using the range profiles.
Syntax
show aclrange [access-list]
Parameters
access-list Enter the keyword access-list to display the ACLs that are using the range profiles configured.
Default None
Command Modes
EXEC
EXEC Privilege
Command
History
Version Description
9.11(0.0) Introduced on the S6000-ON, S6100-ON, Z9100-ON.
Usage
Information
Use the show aclrange to display the list of ACL ranges configured.
Use the show aclrange access-list to display the ACLs associated with the configured range profiles.
Examples
To display the list of ACL ranges:
DellEMC# show aclrange
INDEX PROFILE_NAME TYPE INVERSE LOWER UPPER REF_CNT
THRESHOLD THRESHOLD
--------------------------------------------------------------------------------------
Access Control Lists (ACL) 189