Deployment Guide

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.4 The brief parameter no longer displays the current Reload mode. To display Reload mode, use the show
reload-type command. Modified the show system stack-unit command output to support Piece
Part ID (PPID).
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 The Boot Flash field displays the code level for boot code 2.8.1.1 and newer, while older boot codes display as
"Present".
7.7.1.0 Added Master Priority field.
7.6.1.0 Introduced on the S-Series.
Example (show
system brief)
Example (S6100–
ON)
DellEMC# show system stack-unit 1
-- Unit 1 --
Unit Type : Management Unit
Status : online
Next Boot : online
Required Type : S6100-ON - 4 Modules, 16x40G/8x100G ports TE/TF/FO/FI/
Current Type : S6100-ON - 4 Modules, 16x40G/8x100G ports TE/TF/FO/FI/
Master priority : NA
Hardware Rev : 0.0
Num Ports : 130
Up Time : 1 day, 0 hr, 3 min
Dell EMC Networking OS Version : 9.13(0.0)
Jumbo Capable : yes
POE Capable : no
FIPS Mode : disabled
Boot Flash : 3.25.2.11
Boot Selector : 3.25.0.0-4
Memory Size : 3203289088 bytes
Temperature : 22C
Voltage : ok
Serial Number : NA
Part Number : GXF8P Rev
Vendor Id : NA
Date Code : NA
Country Code : NA
Piece Part ID : N/A
PPID Revision : N/A
Service Tag : N/A
Expr Svc Code : 0
Auto Reboot : enabled
Burned In MAC : 90:b1:1c:f4:9b:9d
No Of MACs : 3
-- Module 1 --
-- Module 1 --
Reqd Mod Type : No Module - No Module
-- Module 2 --
Status : online
Module Type : S6100-MOD-8xETH100-4CXP-T - 8-port 100GE QSFP28_4CXP+
Num Ports : 8
Num Ports : 8
Hot Pluggable : yes
-- Module 3 --
-- Module 3 --
144
Control and Monitoring