White Papers

Table 20. Queue Assignments (continued)
Internal-priority Queue
7 3
Table 20. Queue Assignments
Internal-priority Queue
0 2
1 0
2 1
3 3
4 4
5 5
6 6
7 7
3. Dot1p->Queue Mapping Configuration is retained at the default value.
Default dot1p-queue mapping is,
DellEMC#show qos dot1p-queue-mapping
Dot1p Priority : 0 1 2 3 4 5 6 7
Queue : 0 0 0 1 2 3 3 3
Default dot1p-queue mapping is,
DellEMC#show qos dot1p-queue-mapping
Dot1p Priority : 0 1 2 3 4 5 6 7
Queue : 2 0 1 3 4 5 6 7
4. Interface Configurations on server connected ports.
a. Enable DCB globally.
DellEMC(conf)#dcb enable
b. Apply PFC Priority configuration. Configure priorities on which PFC is enabled.
DellEMC(conf-if-te-1/1)#pfc priority 1,2
Using PFC to Manage Converged Ethernet Traffic
To use PFC for managing converged Ethernet traffic, use the following command:
dcb-map stack-unit all dcb-map-name
Configure Enhanced Transmission Selection
ETS provides a way to optimize bandwidth allocation to outbound 802.1p classes of converged Ethernet traffic.
Different traffic types have different service needs. Using ETS, you can create groups within an 802.1p priority class to
configure different treatment for traffic with different bandwidth, latency, and best-effort needs.
262
Data Center Bridging (DCB)